Products Marked *** Are Only Available Directly From Wester's Garage

CODES:

"WK" orders ship within 1 week
"SM" orders ship next day when you ship us your PCM
"SD" orders ship same day

ALL PRICES ARE IN US FUNDS
 FREIGHT INCLUDED FOR COMPUTERS ONLY
(FOR CONTINENTAL NORTH AMERICA)

 

AutoEnginuity's Scan Software 

Applications

What you're buying...

Price / Code

Purchase
PC-based ScanTool
(OBD-II Hardware)		 #ST05 - USB version with CAN support PC-based OBD-II ScanTool $249.95 SM

PC-based ScanTool
(ProLine Hardware)		 #ST06 - USB version with CAN support PC-based ProLine ScanTool $249.99 SM
Pocket PC-based OBD-II ScanTool #ST02 - RS-232C serial with CAN support Pocket PC-based OBD-II ScanTool $249.95 SM

Palm-based OBD-II ScanTool #ST03 - RS-232C serial with CAN support Palm-based OBD-II ScanTool $249.95 SM

OE Coverage Options (Enhanced Interface Options)
 Enhanced Interface options are activation codes only (except for BMW and Chrysler) so nothing is shipped out. The activation procedure will be emailed to you upon purchase. BMW and Chrysler require special hardware and cabling, and shipping costs will be incurred. All enhanced options require the ScanTool product to operate as they are only expansions.
Enhanced Ford Expansion #EI01 - Access Ford-specific sensors not covered by the OBD-II specification Enhanced Ford Expansion
(Requires ST05 USB or serial hardware Aug '06+)		 $199.95 SM
Enhanced GM Expansion with CAN D #EI02 - Access GM-specific sensors not covered by the OBD-II specification Enhanced GM Expansion
(Requires ST06 ProLine Interface)		 $229.95 SM
Enhanced Toyota Expansion #EI03 - Access Toyota-specific sensors not covered by the OBD-II specification Enhanced Toyota Expansion $149.95 SM

Enhanced PC Chrysler (Full) Expansion #EI04-2 - Access Chrysler-specific sensors not covered by the OBD-II specification Enhanced PC Chrysler Expansion $229.95 SM

Enhanced Mazda Expansion #EI05 - Access Mazda-specific sensors not covered by the OBD-II specification Enhanced Mazda Expansion $149.95 SM
Enhanced Nissan Expansion #EI06 - Access Nissan-specific sensors not covered by the OBD-II specification Enhanced Nissan Expansion $149.95 SM

Enhanced BMW Expansion #EI07 - Access BMW-specific sensors not covered by the OBD-II specification Enhanced BMW Expansion
Requires new USB or serial hardware (Aug. '06+)		 $229.95 SM

Enhanced Honda Expansion #EI08 - Access Honda-specific sensors not covered by the OBD-II specification Enhanced Honda Expansion
 Contact shipping if you need Pocket PC version		 $229.95 SM

Enhanced Hyundai/Kia Expansion #EI09 - Access Hyundai-specific sensors not covered by the OBD-II specification Enhanced Hyundai/Kia Expansion
 Requires new USB or serial hardware Aug. '06+		 $149.95 SM
Enhanced Land Rover Expansion #EI10 - Access Land Rover-specific sensors not covered by the OBD-II specification Enhanced Land Rover Expansion
 Requires new USB or serial hardware April '07+		 $229.95 SM

Enhanced Jaguar Expansion #EI11 - Access Jaguar-specific sensors not covered by the OBD-II specification Enhanced Jaguar Expansion
 Requires new USB or serial hardware April '07+		 $229.95 SM

Enhanced Subaru Expansion #EI12 - Access Subaru-specific sensors not covered by the OBD-II specification Enhanced Subaru Expansion
 Requires ST06 ProLine Interface		 $149.95 SM
Enhanced Porsche Expansion #EI13 - Access Porsche-specific systems not covered by the OBD-II specification Enhanced Porsche Expansion
 Requires new USB or serial hardware Aug '06+		 $229.95 SM

Enhanced Mitsubishi Expansion #EI15 - Access Mitsubishi-specific systems not covered by the OBD-II specification Enhanced Mitsubishi Expansion
 Requires ST06 ProLine Interface		 $229.95 SM
Enhanced Audi / VW Expansion #EI16 - Access Audi / VW-specific systems not covered by the OBD-II specification Enhanced Audi / VW Expansion
 Requires ST06 ProLine Interface		 $229.95 SM
Enhanced Mercedes Expansion #EI17 - Access Mercedes-specific systems not covered by the OBD-II specification Enhanced Mercedes Expansion
 Requires ST06 ProLine Interface		 $229.95 SM
Hardware Options
 Bluetooth options require the connector to be modified. OBDII connectors in the field will have to be returned for the Bluetooth upgrades.
PDA/Dual Bluetooth Wireless Interface #EH03 - PDA must be Bluetooth-enabled.
Not compatible with PC/Laptop USB connectors, and the HP 5555.		 PDA/Dual Bluetooth Wireless Interface $129.95

PC 500ft Wireless Interface #EH04 - PC USB Only PC 500ft Wireless Interface CURRENTLY UNAVAILABLE N/A
Bundled Offerings
 All bundles are assumed to be PC USB versions. Notify us if you would prefer a PDA version.
Pro-Line ScanTool Bundle

#SP01 - Includes:
• USB ScanTool (ST05)
• ProLine Interface (ST06)
• Enhanced Ford Exp.
• Enhanced GM (with CAN D) Exp.
• Enhanced Chrysler (Full) Exp.
• Enhanced Toyota Exp.
• Enhanced Nissan Exp.
• Enhanced Honda Exp.
• Enhanced Mazda Exp.
• Enhanced Hyundai / Kia Exp.
• Enhanced Mitsubishi Exp.
• Enhanced Isuzu Exp.

 $1399.95
European Expansion for ProLine #SP07-2 - Includes:
• SP07 European ScanTool Bundle less ST05 and ST06 hardware		 $1199.95
Total Ford ScanTool Bundle #SP03 - Includes:
• USB ScanTool (ST05)
• Enhanced Ford Exp.		 $399.95
Domestic ScanTool Bundle #SP05 - Includes:
• USB OBD-II ScanTool (ST05)
• ProLine Interface (ST06)
• Enhanced Ford Exp.
• Enhanced GM (with CAN D) Exp.
• Enhanced Chrysler (Full) Exp.		 $699.95 SM

Asian ScanTool Bundle #SP06 - Includes:
• USB OBD-II ScanTool (ST05)
• ProLine Interface (ST06)
• Enhanced Toyota Exp.
• Enhanced Honda Exp.
• Enhanced Nissan Exp.
• Enhanced Hyundai / Kia Exp.
• Enhanced Mazda Exp.
• Enhanced Subaru Exp.
• Enhanced Mitsubishi Exp.		 $699.95

European ScanTool Bundle
 		 #SP07 - Includes:
• USB OBD-II ScanTool (ST05)
• ProLine Interface (ST06)
• Enhanced Audi / VW Exp.
• Enhanced BMW / MINI Exp.
• Enhanced Mercedes Exp.
• Enhanced Jaguar Exp.
• Enhanced Land Rover Exp.
• Enhanced Porsche Exp.		 $1399.95
 
Cables
Nissan DDLI 14pin Adaptor Cable #AC06 ProLines purchased prior to Jan. 11th, 2010   $29.95
OBD-II 10' Extension Cable (16pin-16pin) #AC09 $49.95

Updates
 Existing customers only.
Enhanced Option Update for Single Region (12 Month Subscription Renewal) #AC10-1 E.g., for Asian or Domestics bundles or 5 or less individual expansions purchased ala carte $50.00

Enhanced Option Update for Two Regions (12 Month Subscription Renewal) #AC10-2 E.g., for ProLine only bundles or 4 - 10 individual expansions purchased ala carte $100.00

Enhanced Option Update for Three Regions (12 Month Subscription Renewal) #AC10-3 E.g., for ProLine with any additional coverage $150.00

OBD-II Hardware Update #AC11 (Requires old OBD-II to be Returned) $149.95

AE Enhanced to ProLine Hardware Update #AC12 (Requires old AE Enhanced to be Returned). Please contact AutoEnginuity for an RMA # $199.95
Latest Software Update on CD-ROM #AC13 $5.95

 
Prices Current as of September 18, 2009

Order Directly from AutoEnginuity

 

The Scan Tool of the future is here now...

AutoEnginuity's Scan Tool is a professional PC, Pocket PC, and Palm diagnostics scan tool for all OBD2 (OBDII) compliant vehicles. AutoEnginuity's scan tool allows you to read your vehicle's diagnostic trouble codes, live vehicle sensors (including wide-band O2 sensors), and inspection/maintenance system test results to quickly determine what service the vehicle requires. Our scan tool not only supports CAN--but also CAN 6x mode. Download version 6.0.2 !! New parameters and more enhancements, making this the scan tool software of choice.

Click here to see our enhanced support for Ford, GM, Toyota, Mazda, Nissan, BMW, Land Rover, Honda, Jaguar, and Chrysler. Click here for complete enhanced option details.

Key Features

  • Diagnostics:
     Did you know the average cost of having your vehicle's Check Engine or Service Engine Soon indicator cleared is $80? What if the only thing wrong with your vehicle is that the gas cap is loose? Don't waste your time or money when AutoEnginuity's OBD2 scan tool can prevent needless trips to the dealer.
     
  • Tuning Your Vehicle:
     Read live data from the onboard engine sensors such as wide-band O2 sensors, fuel adaption, MAF, ignition timing advance, and lambda readings. Observe detonation, fuel trim values and reset adaptives for fast PCM tuning. If your vehicle supports wide-band O2 sensors, the Scan Tool can show you real-time air/fuel mixtures. Finally, data log them all in CSV- and XML-formats with 1ms sampling accuracy to a spreadsheet.
     
  • Emissions:
     Did you know that almost all states are using OBD2-based emission testing for all 1996 and newer passenger vehicles? If you have a Check Engine or Service Engine Soon indicator illuminated, or a specific inspection system monitor test fails, your vehicle will fail its emissions test. With AutoEnginuity's OBD2 scan tool you can inspect your vehicle’s compliance before you wait in line and pay for the test.
     
  • Performance Analyzer:
     Don't buy into claims of increased horsepower or added torque; you can verify whether that new, expensive part really works. Do your own dynamometer and acceleration testing at your own convenience and without having to rent expensive dynamometer time.

    With AutoEnginuity's SpeedTracer you can measure:

    • 0-60ft time
    • 0-60 MPH
    • 1/8 mile time
    • 1/8 mile speed
    • 1/4 mile time
    • 1/4 mile speed
    • G Forces
    • SAE Horsepower
    • Torque
    • SAE Horsepower and Torque vs RPM graphing
    • Speed vs Time graphing

    Best of all, SpeedTracer is free with every diagnostics scan tool purchase.

Back to Top

AutoEnginuity's Scan Tool is a hardware and software combination for Windows PC, Windows Mobile (formerly Pocket PC) 2002 and 2003 compliant PDAs, and Palm computing devices.

AutoEnginuity's Scan Tool was designed to be as easy to learn—as it is powerful. Scan Tool comes with an automated installation process, a complete and comprehensive User Guide, and an easy-to-use interface. You won't have to spend valuable time learning another piece of software, you can focus on what's important—servicing the vehicle.

What AutoEnginuity's Scan Tool can do:

  • Save, print, read and clear Stored and Pending P, U, B, and C Trouble Codes. Now supporting 14,000+ manufacturer specific codes.
  • Read and clear Freeze Frame data
  • View live vehicle sensors in a meter, graph, or gauge format.
  • View oxygen sensor live data and test results.
  • View all 11 Inspection/Maintenance systems and Mode 6 data.
  • Unlimited logging of live vehicle sensors in XML or CSV (1ms logging accuracy)
  • Playback your datalogs for offline analysis.
  • Run and query specific component and system tests. Support for generic and enhanced bi-directional tests.
  • View generic and manufacturer enhanced data on the same tool.
  • English or Metric (SI) units of measure supported.
  • Configure your sensors' ranges, scaling value, audible alert triggers, units, and sampling rate.
  • Savable configurations. Set up the interface to suit your preferences and save it so you never have to do it again.
  • Supports 1996 and newer passenger vehicles, whether it be domestic, Asian, or European.
    SAE interfaces: J1850 (PWM and VPM), ISO-9141-2, ISO-14230 [KWP2000], and CAN (optional).1

1 CAN support is an optional daughter board expansion for our OBDII connector. CAN is used in 2004 Ford, Mazda, BMW, Mercedes, and Jaguar, and is the required electrical interface for passenger vehicles starting in the 2008 model year. 2 Support for this feature is vehicle dependant.

Back to Top

Something we offer that the others don’t:

  • Bi-directional support. You have the ability to initiate system and component tests.2
  • Mode 6 support. If a system test fails, now you can see the results from the failing component; not just the system.
  • Our Mode 6 data is fully translated so you don't have to waste hours looking the scale and definitions.2
  • Mode 9 support. Full ECM information including CAL, CVN, and VIN reporting.
  • KWP2000 support and CAN (optional) support.1
  • Support for the new extended sensor list (see below) that's 83 sensors--now with 2005 sensor list !
  • Wide-band O2 sensor support.2
  • Wireless (optional) and touch screen-enabled for tablet PC's.
  • Most importantly—ALL THREE vehicle interfaces in one. This is a savings of hundreds of dollars over the competitors' units.

Click here to see our enhanced support for Ford, GM, Toyota, Mazda, Nissan, BMW, Land Rover, Honda, Jaguar, and Chrysler. Click here for complete enhanced option details.

Back to Top

CLICK ON THE APPROPRIATE LOGO FOR SUPPORT

ford-logos.gif (5208 bytes)

gm-logos.gif (8004 bytes)

   

Back to Top

7.1 UPDATE

AutoEnginuity would like to announce the release of the 7.1 version of it's popular ScanTool software. The ScanTool 7.1 release carries on the tradition of closing any remaining gaps in our Domestic and Asian coverage. Coverage now includes Subaru body systems, Toyota now supports body and chassis controller update rates as much as 10x faster, Honda System Test descriptions are now provided as is support for the Crank Pattern Clear and Learn test, and Aston Martin added the DB9 and Vanquish model support.

02/19/2009 7.1 Release:

  • Enhanced Aston-Martin (Ford) support:

    • Added '03 DB7 Vantage full model year support

    • Added '07 - '08 DB9 enhanced powertrain coverage

    • Added '03 - '06 Vanquish full systems coverage

    • Added 'full Mode 6 support for DB7, DB9, and Vanquish models
       

  • Enhanced Chrysler-family support:

    • Improved communication for AE Enhanced Rev 2 connectors on NGC-based models

    • Added missing transmission entry for the '04 Dodge Intrepid

    • Added the ability for the user to manually enter the Pinion Factor for VPW-based modules

    • Added more 'EATX / JTEC Transmission Parameters' group sensors for '01-'05 JTEC engine controllers

    • Added Cylinder Contribution sensors for the '04 - '05 Cummins
       

  • Enhanced Ford-family support:

    • Improved Powerstroke 7.3L ABS support by only showing the bi-directional controls used for this model

    • Added all some missing IPATS sensors for the Enhanced Powertrain CAN system

    • Fixed Powerstroke 7.3L ECM crashing during sensor retrieval
       

  • Enhanced GM-family support:

    • Improved Communication for GM CAN sensor retrieval

    • Added VSES for Chassis '00 - '05 Passenger product line H, Buick and Pontiac

    • Added VSES for '03 - '04 Cadillac D CTS

    • Added Chassis controller support for '05 - '07 Cadillac STS product line D

    • Added missing transmission for the 5.7 Liter L31 product line K Chevy 2500 '00

    • Added missing Hummer H1 support from '04 and '06

    • Added Workhorse support for Engine and Transmission for '06-'08

    • Added Workhorse W20Series support

    • Added Fuel Pump Control Module support

    • Fixed issue with retrieving trouble codes on '06 CAN based Duramax Powertrain modules (requires AE Firmware 28)
       

  • Enhanced Honda-family support:

    • Added missing System Test descriptions and operations instructions

    • Added Civic 5 Door ABS specific support '06 - '08

    • Added Crank Pattern Clear/Learn Test for CAN-specific vehicles

    • Added Tire Pressure Module System

    • Added Accord '08+ based SRS module addressing

    • Changed the ABS Sensor Calibration Test into a single test called 'Calibrates All Sensors'
       

  • Enhanced Subaru support:

    • Added Airbag full system support

    • Added Occupant Detection System full system support

    • Added Integrated Unit Module full system support
       

  • Enhanced Toyota-family support:

    • Added missing ABS CAN PID support

    • Improved Active Front Steering, Driver Seat, Passenger Seat, Sliding Roof, TPWS, Meter, Mirror Right, Mirror Left, Tilt and Telescope, Back Door sensor support by implementing PID tables to remove sensors that are not supported by the current controller

    • Improved all body controller data rates by handling the System Busy responses quicker

    • Fixed TPWS ID 5 sensors not working

    • Fixed trouble code retrieval from single CAN responses losing the last byte in the response

Back to Top

7.2 UPDATE INFORMATION

Link to AutoEnginuity Letter

    • 7.2 UPDATE

    Greetings!

    AutoEnginuity would like to announce the release of the 7.2 version of it's popular ScanTool software. The ScanTool 7.2 release is the long awaited update to our enhanced European coverage. Enhanced Porsche now updates to include live data and bi-directional support for 60+ controllers. Enhanced BMW adds 40+ new controllers for the E6X and E9X up to '08 models support. Enhanced Mercedes and Audi/VW are released with the most competitive after-market implementations yet. Finally, last but certainly not least, GM transmission data stream has been completed and we are the first to introduce the GM single-wire CAN body systems.

    To achieve the advances in our coverage and data rates we required new hardware called the ProLine hardware. All of the new European support requires the new ProLine hardware to operate. ProLine customers can purchase the full European package for 1199.95 USD (SP07-2). This package will also include the hardware upgrade from the AE Enhanced to the new ProLine hardware. All other customers wanting the new ProLine hardware can purchase the AC12 for 199.95 USD and upgrade their AE Enhanced hardware. Finally, the ProLine hardware will also eliminate the need for the BMW and Porsche pigtail adaptors. The hardware can now electrically switch pins as necessary.

    The Audi/VW expansion (EI16), Porsche expansion (EI13), and Mercedes expansion are 230 USD each and available today.

    Complete details for this release can be found on our site here: Release Notes.txt.

    Release highlights include:

    04/15/2009 7.2 Release:

    • Enhanced Audi / VW support:

      • Adaptation

      • Coding II/Login (7-digit PIN/SKC not supported

      • Freeze Frame

      • Login

      • Module Recoding (Soft and Long)

      • Module Information

      • Module Sensor Mapping

      • Network Test

      • Output Test (Automatic and Specific)

      • SRI Reset

      • Even CAN support with Gateway List, Optical Bus Diagnostics, etc.
         

        •

    • Enhanced BMW / MINI support:

      • Improved BMW data rates by a factor of 4 when using the new ProLine Connector

      • Added enhanced 3 Series (E90/E91/E92/E93) '06 - '08 full model support (Requires ProLine Connector)

      • Added enhanced 5 Series (E60/E61) '04 - '08 full model support (Requires ProLine Connector)

      • Added enhanced 6 Series (E63/E64) '04 - '08 full model support (Requires ProLine Connector)

      • Added enhanced 7 Series (E65/E66) '02 - '08 full model support (Requires ProLine Connector)

      • Added enhanced Z4 M Series (E85/E66) '06 - '08 MS70 S54 engine support

      • Added MINI R50/R52/R53 full IKE bi-directional support including service reset functions

      • Added Conditional Based Service (CBS) for E6X and E9X models (Requires ProLine Connector)

      • Finalized VIN decoding for models to include determining the engine series

      • Fixed 330Xi and 330Xd tables being swapped
         

        •

    • Enhanced Chrysler-family support:

      • Improved Powerstroke 7.3L ABS support by only showing the bi-directional controls used for this model

      • Added all some missing IPATS sensors for the Enhanced Powertrain CAN system

      • Fixed Powerstroke 7.3L ECM crashing during sensor retrieval
         

    • Enhanced GM-family support:

      • Added Single-Wire CAN based modules (Requires ProLine Connector)

      • Added bitmapped and state sensors for VPW-based Transmission modules

      • Added CAN CKP Test support adding support for 33 more engines

      • Added Injector Flow Rate Reprogramming for '06 Duramax 6.6 Liter

      • Added Glow Plug Control module support
         

        •

    • Enhanced Mercedes support:

      • Added enhanced C Class '98 - '08 full model support (Requires ProLine Connector)

      • Added enhanced CL Class '98 - '08 full model support (Requires ProLine Connector)

      • Added enhanced CLK Class '97 - '08 full model support (Requires ProLine Connector)

      • Added enhanced CLS Class '04 - '08 full model support (Requires ProLine Connector)

      • Added enhanced E Class '98 - '08 full model support (Requires ProLine Connector)

      • Added enhanced G Class '98 - '08 full model support (Requires ProLine Connector)

      • Added enhanced GL Class '06 - '08 full model support (Requires ProLine Connector)

      • Added enhanced GLK Class '08 full model support (Requires ProLine Connector)

      • Added enhanced ML Class '98 - '08 full model support (Requires ProLine Connector)

      • Added enhanced R Class '06 - '08 full model support (Requires ProLine Connector)

      • Added enhanced S Class '98 - '08 full model support (Requires the ProLine Connector)

      • Added enhanced SL Class '98 - '08 full model support (Requires ProLine Connector)

      • Added enhanced SLK Class '97 - '08 full model support (Requires ProLine Connector)
         

        •

    • Enhanced Porsche support:

      • Added enhanced 993 (911) '95 - '97 ' full model support (Requires ProLine Connector)

      • Added full live data and bi-directional support for 60+ controllers (Requires ProLine Connector)

      • Adding system coverage for: ABS 5, Rollover Protection, Tiptronic2, Park Assist, and PTM

      • Removed the need for 16pin adaptor with new ProLine Hardware (all except 911 993 models)

    Back to Top

    7.4 UPDATE

    Greetings!

    AutoEnginuity would like to announce the release of the 7.4 version of it's popular ScanTool software. This version finalizes the European coverage efforts we've been working on for the last year. We sent engineering to dozens of European dealerships in the United States and the United Kingdom to ensure that our coverage was the most complete in the industry.

    Complete details for this release can be found on our site here: Release Notes.txt.

    Release highlights include:

    09/04/2009 7.4 Release:

    • Enhanced Audi / VW support:

      • Added the module ID to the sensor name on the system list

      • Added ADC Channel support for KWP1281 modules

      • Added SRI function for KWP2000 modules

      • Added auto baud rate detecting support to speed up initial system communication
         

    • Enhanced BMW / MINI support:

      • Added full MINI (R55/R56/R57) support

      • Added full X6 xDrive 3.0i and BMW X6 xDrive 5.0i (E71) support

      • Added 120d and 123d '05 - '08 (E8X) support

      • Added 318i E46 DME N46 full system model support

      • Added full EGS GM6 system support

      • Added full ANT, AMP, AMPH. BO, TCU, and ULF system support

      • Added full EDCSHL, EDCSHR, EDCSVL, EDCSVR system support

      • Added full TMFA, TMBF, TMFAH, TMBFH system support

      • Added full VDM and VTG system support

      • Added more LSZ2 system trouble code descriptions

      • Improved 316i DME N40/N42 sensor support

      • Improved 1 Series body controller support to include Electronic Power Steering and SD
         

    • Enhanced Chrysler-family support:

      • Added VPW-based OCM System Test
         

    • Enhanced GM-family support:

      • Added ABS Automated Bleed Routine (Requires ProLine Connector)

      • Added bitmaps and states for enhanced powertrain '96 - '97

      • Added text-based responses for VPW-based DPID sensors
         

    • Enhanced Honda-family support:

      • Improved Mode 6 descriptions '96 - '09
         

    • Enhanced Jaguar support:

      • Added SType 2.7L diesel '05 - '08 full model support
         

    • Enhanced Mercedes support:

      • Added DME ME 97 full bi-directional control support

      • Added EGS53 full system support

      • Added C, CLK, E (missing 210), G, GL, GLK, ML, R, S, SL, and SLK Class full door and trunk system support

      • Added Power Window Normalization support for Door Control Modules (DCMXXX) and on the LCP163 for 163 models

      • Added DME CDI2 and CDI5 (diesel) full system support (to include Reset Quantity Mean Value Adaptation Data and others)

      • Added UVS230C (Vario Roof) Denormalization functions for windows and remote trunk lid

      • Added missing Multimedia systems such as Satellite Radio, Universal Telephone, Navigation, etc.

      • Added missing ABC Move Towards Calibrated Level system test

      • Added LCP163 full system support (to include Power Window Denormalization)

      • Improved trouble code clearing for older systems
         

    • Enhanced Toyota-family support:

      • Added full diesel CAN EFI support

    Back to Top

    8.0 UPDATE

    AUTOENGINUITY RELEASES SCANTOOL 8.0
    MESA, ARIZONA – November 15th, 2009– AutoEnginuity, LLC, a global engineering company specializing in
    vehicle diagnostic solutions, today announced the worldwide release of ScanTool® 8.0 for the Windows® platform.
    ScanTool ® is a vehicle diagnostics system for the professional vehicle service industry.

    AutoEnginuity would like to announce the release of the 8.0 version of its popular ScanTool software. This version
    includes the model year 2009 support for all enhanced expansions.

    A key feature is support for all Asian enhanced expansion to operate with the ProLine hardware. Using the ProLine
    hardware for these Asian expansions will allow for more coverage (i.e., Toyota TPWS and Air Conditioning
    unavailable with the OBDII hardware); more electrical interfaces (OBDI Nissan DDL1 for late model AT controllers);
    no pigtail requirements (i.e., Hyundai/Kia); and, finally, faster connections by no longer requiring an OBDII connection
    for even enhanced controllers (i.e., Nissan late models will connect ten seconds faster.).

    Other key features, Windows 7 support, and for our customers who choose to develop their own software, we now are
    offering a programming interface for the ProLine hardware.

    Finally, this update will also include the new SpeedTracer 5.0. This new version includes support for the ProLine
    hardware, more Vehicle Profiles, and improved MPG support.

    Release highlights are:

    • Enhanced Audi / VW support:

      • Added 2009 coverage
         

    • Enhanced BMW / MINI support:

      • Added 2009 coverage (excluding F01 7 Series)

      • Added Transmission SMG IV full system support

      • Added HUD full system support

      • Improved DME ME9 MS60 bi-directional and added reset adaptations
         

    • Enhanced Chrysler-family support:

      • Added 2009 coverage

      • Added 1k new DTC descriptions
         

    • Enhanced GM-family support:

      • Added 2009 coverage (excludes transmission controllers at this time)

      • Added bitmaps and states for enhanced powertrain '96 - '97

      • Added text-based responses for VPW-based DPID sensors
         

    • Enhanced Honda-family support:

      • Added 2009 coverage
         

    • Enhanced Hyundai / Kia support:

      • Added 2009 coverage

      • Added ProLine hardware support

      • Added EPS ES95820 Rev02 CAN sensor support

      • Added TPMS ES95800 Rev01-Rev04 full system support

      • Added ABS ES95660 Rev38 full system support

      • Added AT GS14 full system support

      • Added PODS Reset for SRS ES95920 Rev24 and ES95210 Rev88 systems
         

    • Enhanced Isuzu support:

      • Added 2009 coverage
         

    • Enhanced Jaguar support:

      • Added 2009 coverage
         

    • Enhanced Mercedes support:

      • Added 2009 coverage
         

    • Enhanced Mitsubishi support:

      • Added 2009 coverage

      • Added full Shift Lever CAN system support

      • Added Steering Angle Initialization and Operation Test function support for ACD CAN systems

      • Added Service Reminder PID support for '04+ models that use Meter 8408

      • Added 09MY TPMS CAN support

      • Improved ACD CAN system support by completing the PID list
         

    • Enhanced Nissan / Infiniti support:

      • Added 2009 coverage

      • Added ProLine hardware support

      • Added DDL1 support for late model Sentra and Versa AT controllers

      • Added full EPS, PSB, ACC, and USM CAN systems support
         

    • Enhanced Porsche support:

      • Added 2009 coverage
         

    • Enhanced Subaru support:

      • Added 2009 coverage
         

    • Enhanced Toyota-family support:

      • Added 2009 coverage

      • Added ProLine hardware support

      • Added TPMS, Air Suspension, and Air Conditioning systems support for the ProLine hardware
         

    Remember--you also have ALL Generic OBD2 scanning and code resetting ability for even the most basic software package for all Domestic and Foreign passenger cars and trucks.

    Click here to see more on the AutoEnginuity Professional line of products.

     

    Back to the PRICE LIST

    Back to Top

    Wester's Garage -- 218 Centre Street -- Box 159 -- Tilley, Alberta -- Canada -- T0J 3K0 ... We'll get YOU going FAST !!
     Thank you for visiting and remember to come back often as our product list is frequently updated!

    If you are experiencing technical difficulties with this site, please email: westers.webmaster@gmail.com
       © Wester's Garage 2010
       Updated June 2010 rw