The Dealer Programming System or DPSTM consist of cables, communication interface, and software
with free updates, giving you the ability to download the software of
your Ford or GM vehicle powertrain control module, save the file in your
computer, and email us the file for modification. The
calibration is then returned via email for upload to your client's
vehicle computer. You always retain the original file if your
client needs their 'stock' programming again. Retail pricing varies depending on options
chosen--but your calibration cost is consistent regardless of changes
requested. The system can also include a laptop computer if so desired
with everything pre-installed.
...Call for
Details...
DPS-LS1 Program DEALER
UPDATES
#1
Dealer Flash Version 2.24
This complete
DPS-LS1 install is required as of
January 2008 for all users. This is the DPS-LS1 Dealer system which
must be installed first. Support list
here.
#2
Latest Remote
Dealer Update
APRIL 30/2009 -- This update now
adds 4.2L inline support 2002 through 2005. This
will update your software to the latest versions and correct the
software ID's for
1996-2007 GM inline 4.2L, V6 and V8 GAS vehicles, 1996-2005 6.5 turbo
diesels, as well as 2001-2006 6.6L Duramax.
YOU MUST RUN and INSTALL #1 Dealer
Flash Version 2.24 and
then the #2 Latest Remote Dealer Update last !!!!!
Because
we supply the 6.5 TD cals to our dealers, you cannot read out a 6.5TD
ECM. We just need the VIN number from the vehicle.
If you happen to find an older calibration than
currently supported, you will get a warning with software calibration
number. Email us the number, and vehicle you are attempting to read,
as well as the computer service number.
We'll promptly update your support level. 1996,1997, 2003. 2004, 2005 V6 Buick, Pontiac, GM,
and Olds support added as of May 2008.
#3 USB Drivers for
USB interfaces WINDOWS 98
or
WINDOWS XP
- Unzip this zip file contents to destination C:\ Program
Files \ PCM
KEYSPAN Software Updates -
Keyspan 19HS Serial to USB Adapter Software Update Download for
Windows 2000 / XP / Vista
FOUND HERE
We HIGHLY
recommend the KEYSPAN USB Serial Adapter Part # USA-19HS for laptops
that do not have a serial port. All new interfaces are CAN enabled and will work with our
latest scan tool
software
package. If you have communication problems, KEYSPAN has software
updates on their website for their serial to USB adapters. Remember,
you can update your original DPS-LS1 interface for $195 to full USB support, no serial
to USB adapter required.
DPS-LS2 Program
DEALER UPDATE Revision "2.08 U"
#1
DPS-LS2 Dealer Software
Current as of Feb 08, 2010
- This complete install is required as of
April 2009 for all users. This is the DPS-LS2 Dealer system update
which now includes more support for 2005-2010 CAN based GM vehicles.
You must return your
DPS-LS2
interface for 2010 updates for the next software update to work correctly--and be
at least running this CURRENT UPDATE. Remember dealers -- this is a FREE
UPDATE FOR YOUR DPS-LS2 system.
#2 USB Drivers for USB
Interfaces
WINDOWS 98
or
WINDOWS XP / Vista
You
must have the USB drivers installed or you will have communication
problems.
#3 Free Scanner
(UPDATED)
for this
DPS LS2 system -- datalogs information through the interface for diagnostic
and tuning work. It's free for our DPS-LS2 Dealers.
Download WinZip for
Free from this website:
FREE WINZIP!!
DPS-FORD Program
DEALER UPDATES
#1
DPS-FORD
Dealer Software
This complete
install is required as of 2010 for all users. This is the
DPS-FORD Dealer system update which now includes more support for
1996-2008 FORD vehicles.
DEALER NEWS and INFO UPDATES:
** For all 2010
vehicles must have a battery disconnect after
reprogramming or poor start and idle problems will result **
NEW ORDER FORMS!! - If you send us order forms for your
client's orders, please use the new order forms (check out the Order
Forms page). Thanks for your cooperation!
The Dealer Programming System
or DPS-LS1TM,
DPS-LS2TM,
DPS-FORDTM consist of cable
sets (USB to PC, OBD2 to vehicle), communication interface, and software
with free updates, giving you the ability to download the software of
your Ford or GM vehicle powertrain control module, save the file in your
computer, and email us the file for modification. The
calibration is then returned via email for upload to your client's
vehicle computer. Retail pricing varies depending on options
chosen--but your calibration cost is consistent regardless of changes
requested. The system can also include a laptop computer if so desired
with everything pre-installed. We're presently recommending Panasonic
Toughbooks !
We've found an issue
with BLUETOOTH laptops and their uncanny method of moving the com
ports around. You will need to make sure your system and our software
are set up on the same com ports !
DOWNLOAD and READ THIS DOCUMENT FOR
IMPORTANT INSTRUCTIONS FOR THE 96-03 6.5 TURBO DIESEL TRUCKS AND H1
HUMMER CALIBRATIONS
CLICK HERE
 -- ALL
DPS-LS2 Dealers -- Send your interface when you can for your
2010 UPDATES. These updates enable 2010 Support. WITHOUT THIS UPDATE
YOU CANNOT REFLASH ANY 2010 VEHICLES !! You can cause damage without
this update--yes, this means YOU !
Further
notice--vehicles with
aftermarket
remote start kits must be totally
disabled before reflashing through the underdash OBD2 port. These
remote systems interfere with the normal communication process and are
damaging processors because of the reflash interruption. ASK
YOUR CLIENT BEFORE YOU TUNE THEIR VEHICLE if they have an aftermarket remote
starter or not--this will save you $100s in time and problems.
WESTERS
GARAGE is OPEN
MONDAY through
FRIDAY 8:00 AM -- 6:00 PM MST
Telephone Tech
Support: Monday to Friday 8:00
AM to 6:00 PM MST
Email Tech Support:
24 Hours a Day, 7 Days a Week
Click on the Map
to See the Time Zones
If you don't email us or
leave messages, we can't be expected to contact you or help you. For email
addresses, check the
CONTACT US
page.
For a list of Canadian Holidays and other days that we are closed,
CLICK HERE
Back to Top
|
