|
Westers Garage
GMT Tuner
This OBD2 Tuning program is a general
purpose VCM calibration editor that allows you to make a wide
variety of calibration changes to your vehicle OBD2 VCM/PCM/TCM from an
'easy to use' Windows environment.
After reading your calibration
from your vehicle control module, the program locates and displays
the calibration parameters in standard engineering units so
there's no need to work with or even understand hex and binary
numbers. We've tried to make the tables simple to understand as
they will often correspond to what your scan tool shows you. Features:
-
Ability to read , modify and reprogram most 1996-2007 GM powertrain control
modules (PCM). This
includes specific 3.1L, 3.4L, 3.8L, 4.0L, 4.3L, 4.6L, 4.8L, 5.0L, 5.3L, 5.7L, 6.0L, 6.5TD, 6.6L Duramax, 7.4L and
8.1L -- the most complete programming lineup available for
popular GM trucks and cars !
-
You can rewrite the calibration section only (faster programming), or
do a complete system and calibration reflash.
-
The software automatically clears trouble codes prior to reading or writing
the PCM
to ensure proper communication . Trouble codes are then re-cleared
after reflashing to ensure normal operation after reprogramming. This
is normally a big problem on Corvette with other programming software
packages.
-
NEW PCM Recovery Feature in the event
of a failed reflash. Recover dead computers previously 'fried' by GM
TIS software or other reprogramming software packages.
-
VIN check and software calibration level check.
-
Control of all torque management and abuse modes.
-
Ability to adjust engine rev and speed limiting for all years
(raising speed limiter requires speed rated tires).
-
Ability to adjust for any tire size or differential ratio change and
fix ABS pulse count for scaling errors.
-
Modify the VE fuel tables for more performance.
-
Modify injection timing for Duramax and 6.5Turbo Diesel as well as
ignition timing in all temperature modes for V6's and V8 gas models !
-
Ability to solve transmission shift problems and improve shift quality.
-
The only available software for 1996-2003+ 6.5 Turbo Diesel tuning !
-
Complete DTC list for check engine light disable -- all model year
trouble codes (It may be against the law to modify these values).
-
Passkey disable and BCM and other module communication disable for Offroad
installations.
-
Enables ability to rescale the fuel tank(s) for larger tank
installations.
-
Copy and paste (any portion of) and
PRINT tables within the editor
.
-
Modify tune directly in the graphical environment and watch the
numerical value text that shows where
you are editing !
-
Full compare between two calibrations (same model only).
-
Ability to 'copyright' your changes and lock the PCM to prevent
over-writing your proven tune. (Locking prevents everyone, even YOU
from re-accessing the ECM).
-
We prefer you tune with a chassis dyno and proper test
equipment, as this software is very powerful.
-
Best of all...NO LICENSE LIMIT ! We no longer offer FREE updates,
other than commitments to our prior customers. Email us for update
requests.
-
Roadrunner USB
Drivers here...usb_drivers.zip
these are needed for the realtime unit, which must be fitted in
the ECM of your choice.
-
The ONLY programming software for the Olds Shelby 1 with 4.0L V8
Northstar !
DOWNLOADS
Standard DDTuner
Version 1.42 current version.
Version 2.01 Update You must have
the Standard Version installed first, or have installed from your CD.
Now includes the
following features:
-
Added
"Calibration module import" function that allows you to import entire
module section from one calibration into another. Very helpful
with transmission swaps.
-
Added the "Table
Export/import function that allows you to export table values to a
file and then import those values into another table or calibration.
-
Added a Reports
menu with new reporting functions including a calibration difference
summary report and a difference detail report for comparing
calibrations.
-
The speed
calibration function for the LT1 cars has been improved and now
includes the speed error method and the automatic updating of the
transmission tables.
-
Added checksum
verification when you open a calibration file. A warning message is
displayed if any incorrect checksums are found.
-
Added command
line support so you can associate *.ddt file with the program and
automatically start the OBDII Tuner by double clicking on a *.ddt
file.
-
Added support for
using a ',' as the decimal separator for European users.
-
The GMT OBDII
Tuner program now supports 32-bit calibration values.
GMT kits are
available in Serial or USB format.
We've used our own
software package since 1996 to develop our own
performance programs. For
software updates, please contact us.
Current Vehicle Support Listing.
Purchase 1 year $1299.00 (all License support for that
specific year) and add on year support for $500 each year requested. Not
model limited. For example--purchase 2002 support. This would cover all
4.3, 4.8, 5.0, 5.7, 6.0, 6.6 and 8.1L cars and trucks for 2002 !
See Programming
Software Price List to view details on purchasing our system
Back to Top
|
|
1-403-377-CARS
(2277) and 1-403-377-2270 (FAX) or
EMAIL US
Thank you for visiting and remember to
come back often as our product list is frequently updated!
|